| Drilling performance | |
|---|---|
| Drilling performance steel (S235JR) | 55 mm |
| Continuous drilling performance steel (S235JR) | 50 mm |
| Thread tapping steel (S235JR) | M 42 |
Roll over image to zoom in
PUURPINK OPTIdrill DH 55G
10,490.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
| Dimensions and weights | |
|---|---|
| Column diameter | 200 mm |
| Length approx. | 850 mm |
| Width/depth approx. | 1060 mm |
| Height approx. | 2545 mm |
| Weight approx. | 907 kg |
| Drilling table | |
|---|---|
| Workspace length | 600 mm |
| Workspace width | 600 mm |
| T-groove size | 18 mm |
| T-groove number | 2 |
| Rotation | 360 ° |
| Angle | ± 90 ° |
| Load bearing capacity | 350 kg |
| Max. distance spindle – drilling table | 725 mm |
| Min. distance chuck – drilling table | 130 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine base | |
|---|---|
| Max. distance spindle – machine base | 1300 mm |
| Work area length | 515 mm |
| Work area width | 570 mm |
| Machine base T-groove size | 18 mm |
| Machine base T-groove number | 2 |
| Machine base T-groove spacing | 150 mm |
| Motor(s) | |
|---|---|
| Coolant pump drive motor output | 100 W |
| Speed range | |
|---|---|
| Speed range | 45 – 2000 min¯¹ |
| Number of gears | 16 Steps |
| Spindle | |
|---|---|
| Quill stroke | 200 mm |
| Spindle chuck | MT 4 |
| Reach | 400 mm |
| Quill feed speed | 0,1 – 0,2 mm/rev |
| Quill feed gears | 3 Steps |
Tehnilised andmed
Lisad
