| Dimensions and weights | |
|---|---|
| Width without material stop | 700 mm |
| Width with material stop | 1300 mm |
| Height lower end position | 1600 mm |
| Height upper end position | 2000 mm |
| Length approx. | 1850 mm |
| Weight approx. | 380 kg |
Roll over image to zoom in
Lintsaag OPTIsaw SD 310V
6,990.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Quiet running
- Heavy cast iron version
- High cutting accuracy due to vibration-free running
- Ball-bearing saw blade guide
- EMV class C2
- Twin-channel safety chain with quick stop in case of emergencyStop
- Chips brush
- Microswitch for automatic limit switch
- Push button – Manual saw band run – the hand lever switches the saw band run on and off
- Serially with high-quality bi-metal saw band
- Material stop with scaling
- Quick clamping vice adjustable via hand wheel. Clamping the workpiece with a handy quick-action clamping lever
- Stable machine base
- End stops adjustable to the degree
- Steplessly adjustable saw blade speed 15 – 90 m/min
- Double miter
- Turntable: Any angle between 45° and -60° can be sawed as the cutting gap swivels with the saw arm
Converter
- Siemens Sinamics G110M
Tehnilised andmed
| Cutting ranges | |
|---|---|
| 0° round (full material) | 255 mm |
| 0° quadratic (full material) | 255 mm |
| 0° rectangle upright (full material) | 200 x 270 mm |
| -45° round (full material) | 190 mm |
| -45° quadratic (full material) | 140 mm |
| -45° rectangle upright (full material) | 140 x 210 mm |
| -60° round (full material) | 110 mm |
| -60° quadratic (full material) | 110 mm |
| -60° rectangle upright (full material) | 110 x 210 mm |
| +45° round (full material) | 190 mm |
| +45° quadratic (full material) | 160 mm |
| +45° rectangle upright (full material) | 160 x 160 mm |
| Electrical Data | |
|---|---|
| Engine power coolant pump | 100 W |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Saw band speed(s) | 15 – 100 m/min |
| Saw band length | 2750 mm |
| Saw band width | 27 mm |
| Saw band thickness | 0.9 mm |
| Cutting angle | 45 – -60 ° |
| Feed | Hydraulic via lowering cylinder |
| Lifting the saw bow | Manual |
Lisad
