| Electrical Data | |
|---|---|
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TU 2004V
1,409.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Precise processing
- Heavily ribbed prism bed made of cast steel, inductively hardened and precision ground
- Hardened and ground Z-axis guideway
- Hardened spindle nose (DIN 6350)
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Automatic longitudinal / lead screw drive
- Roll-rolled trapezoidal thread of the lead screw
- Leadscrew stored in two sintered bearings
- Longitudinal, top and top slides
- Right / left rotation in the control panel switchable
- Hardened main spindle mounted in adjustable precision tapered roller bearings
- Tapered roller bearings in P5 quality
- Cylindrical center mount
- Hardened spindle nose with Ø 21 mm spindle bore
- Chuck concentricity better than 0.04 mm
- Tailstock adjustable for bow turning
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Emergency stop impact switch
- Lathe chuck protection
- thrust bearing
- Change gear
- Quadruple steel holder, rotatable
- Replacement gear set in the standard scope of delivery enables large thread cutting area
- 3-jaw lathe chuck in the standard scope of delivery
- EMC filter class C1
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Length approx. | 830 mm |
| Width/depth approx. | 425 mm |
| Height approx. | 360 mm |
| Weight approx. | 65 kg |
| Feed | |
|---|---|
| Longitudinal feed range | 0,1 – 0,2 mm/rev |
| Number of longitudinal feeds | 2 |
| Pitches | |
|---|---|
| Metric pitch | 0,25 – 3 mm/rev |
| Number of metric pitches | 14 |
| Imperial pitch | 44 – 8 Gg/1″ |
| Number of imperial pitches | 12 |
| Speed range | |
|---|---|
| Number of gears | 2 |
| Speed range | 150 – 2500 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle bore/rod passage diameter | 21 mm |
| Spindle cone | MK 3 |
| Chuck passage diameter | 20 mm |
| Tool holder max. chuck height | 12 mm |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C1 |
| Tailstock | |
|---|---|
| Chuck | MK 2 |
| Quill stroke | 65 mm |
| Travel | |
|---|---|
| Travel upper slide | 55 mm |
| Travel cross slide | 75 mm |
| Travel carriage saddle | 300 mm |
| Work areas | |
|---|---|
| Max. height | 100 mm |
| Max. width | 300 mm |
| Swing diameter above planing slide | 110 mm |
| Bed width | 100 mm |
Lisad
