| Electrical Data | |
|---|---|
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TU 2304V
1,809.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Precise processing
- Cast iron gray prism bed, aged for at least six months, inductively hardened and precision ground
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Rolled trapezoid spindles
- Leadscrew stored in two sintered bearings
- All guides can be adjusted by wedge strips
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.01 mm
- Quadruple tool holder
- Concentricity – chuck better than 0.05 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Right / left rotation in the control panel switchable
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Emergency stop impact switch
- Lathe chuck protection
- thrust bearing
- Change gear set for threading
- Extensive accessories
- 3-jaw lathe chuck in the standard scope of delivery
- Stable value
- Speed change easily adjustable via potentiometer
- Digital speed display
- EMC filter class C1
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Length approx. | 965 mm |
| Width/depth approx. | 585 mm |
| Height approx. | 510 mm |
| Weight approx. | 114 kg |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 3,5 mm/rev |
| Number of metric pitches | 14 |
| Imperial pitch | 44 – 8 Gg/1″ |
| Number of imperial pitches | 14 |
| Speed range | |
|---|---|
| Number of gears | 2 |
| Speed range | 150 – 2200 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle chuck | cylindrical Ø 72 mm |
| Spindle bore/rod passage diameter | 20 mm |
| Spindle cone | MK 3 |
| Tool holder max. chuck height | 14 mm |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C1 |
| Tailstock | |
|---|---|
| Chuck | MK 2 |
| Quill stroke | 70 mm |
| Travel | |
|---|---|
| Travel upper slide | 75 mm |
| Travel cross slide | 120 mm |
| Travel carriage saddle | 360 mm |
| Work areas | |
|---|---|
| Max. height | 115 mm |
| Max. width | 450 mm |
| Swing diameter above machine bed | 230 mm |
| Swing diameter above planing slide | 128 mm |
| Bed width | 135 mm |
Lisad
