| Electrical Data | |
|---|---|
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TU 2506 (230V)
1,980.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Precisely manufactured
- Powerful, maintenance-free engine
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose ≤ 0.009 mm
- Concentricity on the lathe chuck ≤ 0.04 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Leadscrew stored in two sintered bearings
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Rolled trapezoid spindles
- Thrust bearing
- Tapered roller bearings in P5 quality
- Hardened main spindle mounted in adjustable precision tapered roller bearings
- Hardened spindle nose with Ø 26 mm spindle bore
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- Upper slide on cross slide slidable
- Chip protection on the upper slide
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Quick, easy and tool-free adjustment of the tailstock by a clamping lever
- Emergency stop impact switch
- Quadruple tool holder
- 3-jaw lathe chuck in the standard scope of delivery
- Change gear set in the standard scope of delivery for thread cutting
- Fully equipped, allowing the user to be productive immediately after commissioning
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Length approx. | 1250 mm |
| Width/depth approx. | 585 mm |
| Height approx. | 475 mm |
| Weight approx. | 138 kg |
| Feed | |
|---|---|
| Longitudinal feed range | 0,07 – 0,4 mm/rev |
| Number of longitudinal feeds | 6 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 4 mm/rev |
| Number of metric pitches | 21 |
| Imperial pitch | 56 – 8 Gg/1″ |
| Number of imperial pitches | 21 |
| Speed range | |
|---|---|
| Number of gears | 6 Steps |
| Speed range | 125 – 2000 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | short taper |
| Spindle bore/rod passage diameter | 26 mm |
| Spindle cone | MT 4 |
| Tool holder max. chuck height | 12 mm |
| Tailstock | |
|---|---|
| Chuck | MK 2 |
| Quill stroke | 65 mm |
| Quill diameter | 30 mm |
| Travel | |
|---|---|
| Travel upper slide | 70 mm |
| Travel cross slide | 110 mm |
| Travel carriage saddle | 550 mm |
| Work areas | |
|---|---|
| Max. height | 125 mm |
| Max. width | 550 mm |
| Swing diameter above machine bed | 246 mm |
| Swing diameter above planing slide | 149 mm |
| Bed width | 134 mm |
Lisad
