| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TU 3008G
4,090.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Precise processing
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Hardened and ground Z-axis guideway
- Smooth-running feed gear with rounded gears running in an oil bath
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Concentricity on the lathe chuck better than 0.04 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Hardened main spindle mounted in adjustable, precision tapered roller bearings
- Tapered roller bearings in P5 quality
- Hardened spindle nose
- Large spindle bore Ø 38 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Guide and feed shaft stored in two sintered bearings
- Automatic longitudinal / flat feeds
- Lead screw and tension spindle cover
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- Change wheel set in the standard scope of supply for thread cutting
- Emergency stop impact switch
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Length approx. | 1525 mm |
| Width/depth approx. | 705 mm |
| Height approx. | 575 mm |
| Weight approx. | 261 kg |
| Feed | |
|---|---|
| Longitudinal feed range | 0,085 – 0,832 mm/rev |
| Number of longitudinal feeds | 9 |
| Flat feed range | 0,01 – 0,1 mm/rev |
| Number of flat feeds | 9 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 3,5 mm/rev |
| Number of metric pitches | 18 |
| Imperial pitch | 56 – 8 Gg/1″ |
| Number of imperial pitches | 21 |
| Speed range | |
|---|---|
| Number of gears | 6 |
| Speed range | 165 – 2400 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 4 |
| Spindle bore/rod passage diameter | 38 mm |
| Spindle cone | MK 5 |
| Tool holder max. chuck height | 18 mm |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 70 mm |
| Quill diameter | 38 mm |
| Travel | |
|---|---|
| Travel upper slide | 65 mm |
| Travel cross slide | 150 mm |
| Travel carriage saddle | 600 mm |
| Work areas | |
|---|---|
| Max. height | 158 mm |
| Max. width | 720 mm |
| Swing diameter above machine bed | 310 mm |
| Swing diameter above planing slide | 190 mm |
| Bed width | 180 mm |
Lisad
