| Dimensions and weights | |
|---|---|
| Length approx. | 2410 mm |
| Width/depth approx. | 1085 mm |
| Height approx. | 1825 mm |
| Weight approx. | 1630 kg |
Roll over image to zoom in
TREIPINK OPTIturn TX 4414
17,990.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Machine bed made of highly ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing due to highly ribbed 25GG cast iron
- Precision machined slides
- Shafts on needle bearings, All components are lubricated in an oil bath
- Bed guides hardened and precision-ground
- All electronic controls centrally accessible
- All gears of the feed gear are made of steel, hardened and ground
- Hand wheels decoupled and tested according to EN 23125
- Double channel right-left switch tested according to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Coolant unit with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- complete control system and feed spindle cover
- Complete illumination of the working area
- Service-friendly removable rear wall
- Hardened and ground face spindle guarantees enormous accuracy and durability
- Thanks to the high cutting performance, high chip removal during roughing machining is no problem
- Energy chain for gentle cable management and hose guide
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, manually movable
- No change gears necessary
- With safety device against simultaneous operation of threading and feed mechanism
- Electronically braked motor
- Electronically feed cut-off of Z-axis
- Electric position switch-off with quadruple position stop
- Three-jaw lathe chuck in standard scope of supply
- Quick change steel holder SWH 5-B
- Digital position display DP700
Tehnilised andmed
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 100 W |
| Electrical connections | |
|---|---|
| Total rated value | 6.1 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 0,752 mm/rev |
| Flat feed range | 0,025 – 0,376 mm/rev |
| Pitches | |
|---|---|
| Metric pitch | 0,5 – 7,5 mm/rev |
| Imperial pitch | 60 – 4 Gg/Zoll |
| Diametrical pitch | 0,25 – 3,75 mm x π |
| Modular thread pitch | 120 – 8 Gg/π |
| Speed range | |
|---|---|
| Number of gears | 12 Steps |
| Speed range | 40 – 2200 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 6 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Tool holder | SWH 5-B |
| Tailstock | |
|---|---|
| Chuck | MT 4 |
| Quill stroke | 180 mm |
| Quill diameter | 58 mm |
| Travel | |
|---|---|
| Travel upper slide | 153 mm |
| Travel cross slide | 290 mm |
| Travel carriage saddle | 950 mm |
| Work areas | |
|---|---|
| Max. height | 220 mm |
| Max. width | 1280 mm |
| Swing diameter above machine bed | 440 mm |
| Swing diameter above planing slide | 250 mm |
| Bed width | 300 mm |
Lisad
