| Dimensions and weights | |
|---|---|
| Length approx. | 1290 mm |
| Width/depth approx. | 1090 mm |
| Height approx. | 2170 mm |
| Weight approx. | 820 kg |
Roll over image to zoom in
FREESPINK OPTIMILL MT 50
10,900.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
| Cooling lubricant system | |
|---|---|
| Coolant pump(s) drive power | 40 W |
| Drilling/milling head | |
|---|---|
| Mill head swivel range | ± 45 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 100 mm |
| Max. size shaft milling cutter | 25 mm |
| Drilling performance steel (S235JR) | 30 mm |
| Continuous drilling performance steel (S235JR) | 25 mm |
| Electrical connections | |
|---|---|
| Total rated value | 4,5 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed speed | |
|---|---|
| X axis | 24 – 720 mm/min |
| Horizontal spindle | |
|---|---|
| Drive motor output | 1,5 kW |
| Reach | 0 – 185 mm |
| Spindle chuck | ISO 40 DIN 2080 |
| Speed range | 60 – 1350 min¯¹ |
| Number of gears | 9 |
| Milling table horizontal | |
|---|---|
| Table length | 1000 mm |
| Table width | 240 mm |
| T-groove size | 14 mm |
| T-groove number | 4 |
| Max. load bearing capacity | 160 kg |
| Travel | |
|---|---|
| X axis manual | 580 mm |
| Y axis manual | 200 mm |
| Z axis manual | 340 mm |
| X axis automatic | 500 mm |
| Vertical spindle | |
|---|---|
| Reach | 240 – 650 mm |
| Spindle chuck | ISO 40 DIN 2080 |
| Speed range | 115 – 1750 min¯¹ |
| Number of gears | 8 |
| Vertical spindle normal operation | 1.1 / 2.2 kW |
| Quill stroke | 120 mm |
Tehnilised andmed
Lisad
