13,550.00€ + KM
| Cooling lubricant system | |
|---|---|
| Coolant pump(s) drive power | 40 W |
| Dimensions and weights | |
|---|---|
| Length approx. | 1650 mm |
| Width/depth approx. | 1310 mm |
| Height approx. | 2160 mm |
| Weight approx. | 1300 kg |
| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ± 45 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 100 mm |
| Max. size shaft milling cutter | 25 mm |
| Drilling performance steel (S235JR) | 30 mm |
| Continuous drilling performance steel (S235JR) | 25 mm |
| Electrical connections | |
|---|---|
| Total rated value | 5 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Horizontal spindle | |
|---|---|
| Drive motor output | 2,2 kW |
| Reach | 35 – 370 mm |
| Spindle chuck | ISO 40 DIN 2080 |
| Speed range | 40 – 1300 min¯¹ |
| Number of gears | 9 |
| Milling table horizontal | |
|---|---|
| Table length | 1270 mm |
| Table width | 280 mm |
| Min. clearance vertical spindle – milling table | 60 mm |
| Max. clearance vertical spindle – milling table | 420 mm |
| T-groove size | 14 mm |
| T-groove number | 4 |
| T-groove spacing | 50 mm |
| Max. load bearing capacity | 150 kg |
| Travel | |
|---|---|
| X axis manual | 750 mm |
| Y axis manual | 230 mm |
| Z axis manual | 360 mm |
| X axis automatic | 680 mm |
| Reach | 220 – 550 mm |
| Spindle chuck | ISO 40 DIN 2080 |
| Speed range | 90 – 2000 min¯¹ |
| Number of gears | 8 |
| Tightening bar | M16 |
| Vertical spindle normal operation | 2,2 kW |
| Quill feed type | automatic |
| Quill diameter | 90 mm |
| Quill stroke | 120 mm |
| Spindle sleeve feed | 0.008 – 0.25 (3 levels) mm/rev |
13,550.00€ + KM
Add to Cart