| Dimensions and weights | |
|---|---|
| Length approx. | 1920 mm |
| Width/depth approx. | 950 mm |
| Height approx. | 2040 mm |
| Weight approx. | 2315 kg |
Roll over image to zoom in
Hüdroajamiga profiililõikur ja stantsimismasin HPS 85 DS
23,550.00€ + KM
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
- DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
- Stepless adjustment of the stroke
- Larger reach for punching station with 620 mm optional, available from HPS 55DS
- Heavy and rigid welded construction
- Standard with notching knife starting from HPS 45S
- With powerful 400 Volt motor
- V-notching knife, oversized punching device and larger throat depth for punching station available on request
- Two-stage foot pedal for inching operation
- Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
- High time savings – cycle times
- No chips
- No cooling
Note:
All hydraulic sectional shears are delivered with oil
Tehnilised andmed
| Angled steel shears | |
|---|---|
| Cutting capacity 90° L section | 150 x 150 x 15 mm |
| Cutting capacity 45° L section | 80 x 8 mm |
| Cutting capacity U-I section (accessory) | 160 x 74 mm |
| Cutting capacity T section (accessory) | 100 x 11 mm |
| Working height | 1200 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Flat steel shears | |
|---|---|
| Material width x max. thickness | 380 x 20 mm |
| Material max. width x thickness | 480 x 15 mm |
| Knife length | 482 mm |
| Angled cut 45° max. leg length x max. thickness | 120 x 15 mm |
| Working height | 940 mm |
| Notching station | |
|---|---|
| Max. material thickness | 13 mm |
| Max. notching width | 52 mm |
| Max. notching depth | 100 mm |
| Working height | 100 x 100 x 13 mm |
| Punching station | |
|---|---|
| Punching force | 85 t |
| Diameter x max. sheet thickness (steel 400 N/mm²) | 33 x 20 mm |
| Max. diameter x sheet thickness (steel 400 N/mm²) | 57 x 10 mm |
| Reach | 355 mm |
| Extended reach (factory option) | 620 mm |
| Max. lift stroke | 80 mm |
| Stroke count | 25 /min |
| Working height | 940 mm |
| Steel bar shears | |
|---|---|
| Capacity round material | 50 mm |
| Capacity square material | 50 mm |
Lisad
